Mercedes-Benz v12 M275 W220 W221 C215 C216 R230 5.5L Bosch 900cc Fuel Injectors
Clean Injection CI-900 Series 900cc injectors are Bosch Motorsport base injectors. Designed to suit Mercedes with M275 V12 Engine. The set of 12 injectors with plug and play connectors will fit the factory fuel rail and factory injector harness without any modifications. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW.
Clean Injection CI-900 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze.
INJECTOR FEATURES:
- Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
- Full Injector Latency Data Provided
- Tunable to factory Rock solid Idle
- Excellent Fuel Atomization
- Direct Plug and Play Fit
- Fast Response time
- Consistent performance all the way to 7 BAR
- 2 Year Unlimited Mile Warranty
- Stainless Steel Internals
- Compatible with all known race fuels including E85
Fitment Guide:
S-Class (W220 and W221)
- 2003–2006 S600 (W220 Chassis, 5.5L V12 Bi-Turbo)
- 2007–2014 S600 (W221 Chassis, 5.5L V12 Bi-Turbo)
CL-Class Coupe (C215 and C216)
- 2003–2006 CL600 (C215 Chassis, 5.5L V12 Bi-Turbo)
- 2007–2014 CL600 (C216 Chassis, 5.5L V12 Bi-Turbo)
SL-Class Roadster (R230)
- 2003–2012 SL600 (R230 Chassis, 5.5L V12 Bi-Turbo)
Injector specs:
Static Flow Rate @ 43.5PSI (300 KPa) = 900cc
Coil Resistance: 12 Ohms / High Impedance / Saturated
14mm Inlet Diameter o-rings
48MM length
Factory fitted with Viton upper and lower o-ring
