Radium Extra Range In-line Fuel Pulse Damper Kit part 20-0200-08 Universal Fit
 
Product Information 
Extra Range In-line Fuel Pulse Damper Kit (20-0200-08) by Radium. The opening and closing of fuel injectors creates pressure pulses in the fuel rail which can lead to unstable fuel pressure. In order to achieve a safe and consistent rail pressure, a fuel pulse damper (FPD) is often necessary. The FPD's internal diaphragm will absorb oscillating pulses and stabilize fuel pressure. This correction can be measured throughout the RPM range and can often help idle surge, especially with high flow injectors. Furthermore, a fuel pulse damper can help solve erratic lean air/fuel ratio spikes, commonly experienced as "stumbling", that are difficult to tune out. When you need a headlight bulb or a stop light switch, you may be tempted to just run down to the local auto parts chain store. But before you waste your time and gas only to find high prices and poor selection, check out our great assortment of bulbs and other electrical parts.
Notes: FPD-XR base pressure requirement = 43 - 78psi (static) The ranges above are base static fuel pressures only. Any dynamic fuel pressure created by a rising-rate FPR outside of this range is acceptable, but only when the base "static" fuel pressure is set within these ranges and the vacuum/boost reference line is hooked up.
 
Kit Includes:
- Anodized/laser engraved aluminum top
- R=range or XR=extra range
- Anodized aluminum body threaded for -8AN ORB fittings
- Anodized aluminum O-ring sealed adapter fittings
- Stainless steel M6 mounting bolts and nuts
- Rubber vacuum hose
- 4mm ID
- Vacuum hose Y-fitting
Product Specifications
- The kit features an anodized aluminum housing with a large 0.69" center bore that uses two in-line inlet/outlet ports that are machined with 3/4"-16 UNF threads for 8AN ORB fittings
- Depending on the size of the fuel feed hose used, there are 3 kits to choose from which include different male adapter fittings (-6AN, -8AN, -10AN)
- These fittings seal to the billet housing using Viton O-rings
- Using the supplied M6 bolts/nuts, the FPD kit can be mounted at any possible angle including upside down
- For best results, the damper should be plumbed as close to the fuel rail(s) as possible
- Like any fuel system part, the FPD kit should be kept away from excessive heat areas
- This product is safe for use with all fuel types including alcohol blends such as E85
 
Product Features
High quality at an affordable price
Expertly made from premium materials
Built to match your exact requirements
FITMENT
Universal