top of page
BMW e36 550cc bosch ev14 fuel injectors
Clean Injection CI550 Series 550cc injectors are Bosch Motorsport base injectors. Designed to suit BMW e36 6 Cylinder engine. The injectors will fit the factory fuel rail and factory injector harness without any modifications. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW.
Clean Injection CI550 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms.  Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 
  • Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
  • Full Injector Latency Data Provided
  • Tunable to factory Rock solid Idle
  • Excellent Fuel Atomization
  • Direct Plug and Play Fit
  • Fast Response time
  • Consistent performance all the way to 7 BAR
  • 2 Year Unlimited Mile Warranty
  • Stainless Steel Internals 
  • Compatible with all known race fuels including E85


Fitment Guide:

  •  1994-1999 M3  S50/S52 3.0L/3.2L
  • 1987-1995 325i M20/M50 2.5L
  • 1996-1999 328i M52 2.8L
  • 1996-1999 323i M52 2.5L
  • M5 S38 3.6L
  • 525i M50 2.5L
  • Z3 S52 3.2L
  • Z3 M52 2.8L
  • M30 3.5L
  • M20 2.5L



Injector specs:


Static Flow Rate @ 43.5PSI (300 KPa) =  550cc/min 

Coil Resistance: 12 Ohms / High Impedance / Saturated

14mm Inlet Diameter o-rings

60MM length 

Factory fitted with Viton upper and lower o-ring

BMW Bosch 550cc ev14 Fuel Injectors E36 M3 M5 m50 S52 m52 3.2L 328i 328i turbo


    Related Products