Bosch ev14 650cc fuel upgrade kit to suit BMW with M20 Engine.
Listing is for a set of 6(pcs) Genuine 650cc Bosch ev14 Fuel Injectors, BMW m20 straight 6 fuel rail large enough to support over 1500WHP, and plug and play injector connectors. The injectors are high impedance which will work perfectly with factory or any aftermarket ECU. Injectors are sold in balanced sets to ensure cylinder per cylinder equal fuel delivery. Anodized silver fuel rail comes with 2pcs 6-AN end fittings, 6-AN return port fitting, and one block off plug. Fuel rail is anodized coated making it compatible with e85/alcohol base fuels. Injectors will come with flow chart and injector latency data to make tuning a breeze. The injectors are the new bosch ev14 design is compatible with all known race fuels on the market today including e85 ethanol and methanol base fuels. At base fuel pressure of (43.5psi) the injectors can support engines making up to 600hp (@ 80% duty). At 4bar fuel pressure the injectors can support engines making up to 700hp. The injectors utilize a 16 hole mist spray pattern which will provide proper fuel atomization resulting in smoother idle, and clean combustion characteristics. With the combination of a balanced set and great fuel atomization, you will achieve light and partial throttle drivability, rock solid idle, easier tuning, and more power output to the wheels.
***NOTE: THIS FUEL UPGRADE KIT WILL ONLY FIT BMW WITH M20 ENGINE OR SETUPS WITH THE SAME FUEL RAIL MOUNTING CONFIGURATIONS.
Applications with M20 Engine:
- 1977–1981 E12 520/6
- 1979–1983 E21 320/6
- 1982–1984 E28 520
- 1982–1988 E28 520i
- 1983–1992 E30 320i
- 1988–1990 E34 520i
Injector specs:
Static Flow Rate @ 43.5PSI (300 KPa) = 650cc/min
Coil Resistance: 12 Ohms / High Impedance / Saturated
16 hole Cone Spray Angle
14mm Inlet Diameter
Factory fitted with Viton upper and lower o-ring
Items Included:
- 6PCS New Bosch ev14 650cc Bosch fuel ev14 injectors
- BMW M20 anodize silver fuel rail kit
- 6(pcs) Plug and Play Adapters
