CIean Injection 1200cc Series Bosch Fuel Injectors for  Honda/Acura B, D, H Series Engine.
 
Clean Injection 1200cc Series line of injectors are here. Our latest addition to our Pro series Injectors. Designed to suit Honda/Acura D, B, and H Series engine. Injectors will come with our custom billet injector port adapters which eliminates the use of the factory large lower seals. Provides a leak proof seal now matter how much fuel pressure is thrown at the injectors.  Injectors will also come with plug connectors with terminal and seals. 
 
The injectors are compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1.1ms.  CI 1200 series injectors utilize a 30 degree mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Every set of Injectors that leaves our shop is goes through extensive testing on industry leading ASNU Classic test equipment. Injectors are flow tested statically, dynamically, and tested at different fuel pressures ranging from 2 bar to 7 bar. They are then sealed and packed in balanced sets within 1 percent with tuning paperwork.  Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 
 
 
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Stainless Steel Internals 
Compatible with all known race fuels including E85
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines! 
 
 
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines! 
 
INJECTOR SPECS:
Nominal Flow Rate – 1200cc @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
Maximum Differential Fuel Pressure – 10.0 Bar (145.0 psi)
Fuel Compatibility – Compatible With All Known Fuels
Electrical Connector – EV1
Coil Resistance: 12 OHMS
 
LISTING INCLUDES:
4pcs CI 1200 SERIES fuel injectors
4pcs EV1 Fuel injector connectors with terminals and seals
4pcs Billet Fuel injector port adapters
3pcs fuel rail spacers