Looking to upgrade injectors without breaking the bank? Listing is for a set of 4 CI-350x Series 350cc fuel injectors to suit engines requiring 48mm length injectors with 14mm top and bottom orings. Perfect for the budget builder looking for rock solid reliability and superb performance for an excellent price.  Injectors are covered under our unlimited-mile warranty.  PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers necessary. Listing includes connectors with terminals and seals to allow for a clean install. 
 
The injectors are compatible with all known fuels including e85. The injectors retains a consistent linear flow from 3bar to 7 bar fuel pressure. Very tuner friendly with fuel trimming down to 1.1ms.  The injectors utilize a 4 hole disc mist spray pattern with excellent fuel atomization resulting in superb idle conditions. Injectors are dynamically and statically flow tested on the industry leading ASNU Classic test equipment. They are then sealed and packed in balanced sets within 1 percent.  Injectors will come with flow sheet with full data specs including injector latency/dead time data for easy tuning. 
 
 
INJECTOR FEATURES:
 
Made in U.S.A trusted quality! E85 Compatible!
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Fast Response time
Consistent performance all the way to 100psi+ Fuel Pressures
Unlimited Mile Warranty
Stainless Steel Internals 
 
 
INJECTOR SPECS:
 
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): 350cc/mi
Coil Resistance: 12.2 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: 30 degree mist (12 hole orifice)
Electrical Connector: USCAR
Fitted with Viton o-rings
Includes lower to injector seal.