Honda Acura CI1000 Series Bosch 1000cc fuel injectors B D H Series

Clean Injection 1000 Series Bosch ev14 1000cc fuel injectors to suit 0BD2 Honda Acura engine. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers necessary. If your vehicle is fitted with a factory resistor box then it must be removed. Listing includes plug and play injector adapters to allow the injectors to plug right into the factory OBD2 injector harness. No cutting or soldering wires necessary.
 
The injectors are compatible with all known fuels including e85 and alcohol base fuels. The injectors retains a consistent linear flow from 3bar to 8 bar fuel pressure. Very tuner friendly with fuel trimming down to 2ms.  The injectors utilize a single 30 degree spray angle with excellent fuel atomization resulting in superb idle conditions. Injectors are sold in balanced sets to insure cylinder to cylinder horsepower equilibrium. Injectors will come with flow sheet with injector data and injector latency. 
 
Vehicle Compatibility Guide:
- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines!
 
INJECTOR SPECS:
 
Static Flow Rate (gasoline) @ 43.5PSI (300kPa): =1000cc
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide 30 degree mist (single orifice)
Electrical Connector: USCAR
Fitted with Viton o-rings
Includes lower to injector seal. 
 
LISTING INCLUDE:
4pcs Clean Injection 10000 Series Bosch 1000cc ev14 fuel injectors
4pcs obd2 plug and play injector adapters
4pcs lower intake to injector seals

Honda Acura OBD2 BOSCH 1000cc Fuel Injectors EV14 Civic Honda B D H F Series

$299.99

Quantity

Clean Injection 1000 Series Bosch ev14 1000cc fuel injectors to suit 0BD2 Honda Acura engine. PLEASE VIEW THE VEHICLE COMPATIBILITY GUIDE BELOW. Injectors are high impedance so no resistor box/injector drivers are necessary. If your vehicle is fitted with a factory resistor box then it must be removed. The listing includes plug-and-play injector adapters to allow the injectors to plug right into the factory OBD2 injector harness. No cutting or soldering wires are necessary.

The injectors are compatible with all known fuels including e85 and alcohol base fuels. The injectors retains a consistent linear flow from 3bar to 8 bar fuel pressure. Very tuner friendly with fuel trimming down to 2ms. The injectors utilize a single 30 degree spray angle with excellent fuel atomization resulting in superb idle conditions. Injectors are sold in balanced sets to insure cylinder to cylinder horsepower equilibrium. Injectors will come with flow sheet with injector data and injector latency.

Vehicle Compatibility Guide:

- 1996-2000 CIVIC/DEL SOL (ALL TRIMS)
- 1996-2000 INTEGRA (ALL TRIMS)
- 1997+ PRELUDE (ALL TRIMS)
- 1996 + ACCORD 4 cylinder (ALL TRIMS)
- Will Also fit all OBD0 & OBD1 JDM engines!

INJECTOR SPECS:

Static Flow Rate (gasoline) @ 43.5PSI (300kPa): =1000cc

Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide 30 degree mist (single orifice)
Electrical Connector: USCAR
Fitted with Viton o-rings
Includes lower to injector seal.

LISTING INCLUDE:

4pcs Clean Injection 1000 Series Bosch 1000cc ev14 fuel injectors

4pcs obd2 plug and play injector adapters

4pcs lower intake to injector seals
Returns are accepted on brand-new (uninstalled) items in their original packaging up to 30 days after delivery in exchange for a merchandise refund. Exchanges (injector size, pistons, rods etc) are subject to a restocking fee depending on the part number, Manufacturer, and the condition in which the item is returned.

How to request a return:

Contact us at cleaninjection@msn.com or send us a direct message to request your return/exchange.

To avoid a restocking fee, the packaging will need to be in as-new condition (no greasy fingerprints on boxes, torn packaging, etc).

No tape or shipping labels are to be applied directly to the manufacturer's packaging. The parts being returned will need to be shipped back in another box that has the label on it.

Electronic items that come sealed from the manufacturer cannot be returned unless the factory seal is intact and the item has never been opened.

We will reach out to you to arrange a refund or exchange once your return is received and processed. Forgetting to include the Return Authorization form with the parts could delay the processing of your return so please remember it and we will process your return as quickly as possible!

Once a Return Authorization is provided. You have 30 days to return the item. If you are unable to send the item back within that time frame, you must contact your Clean Injection Performance Person or cleaninjection@msn. Otherwise, after 30 days your Return Authorization will automatically be closed