Clean Injection CI650 Series injectors are Bosch Motorsport base injectors. The injectors are have ev6 connection but will come with adapters to convert to ev1 if needed. The injectors will fit the factory fuel rail or aftermarket fuel rail with injectors requiring the standard 60mm OEM length. PLEASE VIEW VEHICLE COMPATIBILITY GUIDE BELOW.
Clean Injection Performance CI-650 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze.
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 7 BAR
2 Year Unlimited Mile Warranty
Stainless Steel Internals
Compatible with all known race fuels including E85
Vehicle Compatibility
1999-2004 FORD F-150 SVT LIGHTNING 5.4L
2010-2014 SVT RAPTOR 6.2L
Injector Specs:
Injector type: EV6, saturated Flow: 650cc at 3 Bar Min. Fuel Delivery: Single-hole disc Electrical Connector: EV6 USCAR Spray angle: 30 degrees Length: 60mm O-rings: 14mm top and bottom Resistance: 12 Ohms High Impedance Fuel Types: Gasoline, E10, E85, Alcohol, Methanol











