6pcs CI-650 Series Bosch 650cc Fuel injectors for Nissan with RB20DET Engine
 
Looking for bigger injectors for your big boosted RB20DET engine? The listing is for a complete set of 6pcs CI-650 Series 650cc Bosch Fuel Injectors for the Nissan RB20DET engine.   Injectors come complete with everything you need to install right out of the box. The Injectors are paired with a set of plug-and-play injector connectors. The injectors will fit the factory fuel rail or any aftermarket fuel rail with the same injector dimension requirements as the RB20 OEM injectors.
 
Clean Injection Performance 650 Series fuel injectors have full stainless steel internals, making it compatible with all known fuels, including e85. The injectors retain a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms.  Every set of Injectors that leaves Clean Injection goes through extensive testing on industry-leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs, including injector latency/dead time data to make tuning a breeze. 
 
 
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 7 BAR
2-Year Unlimited Mile Warranty
Stainless Steel Internals 
Compatible with all known race fuels, including E85
 
APPLICATIONS:
 
1989-1994 RB20DET Engine
 
 
Injector specs:
Static Flow Rate @ 43.5PSI (300 KPa) = 650cc
Coil Resistance: 12 Ohms /  High Impedance / 
Cone Spray Angle
10.5mm Inlet Diameter 
e85/Alcohol compatible
Connector: Minitimer (Bosch EV6)
Cone Spray Pattern
Factory fitted with Viton upper and lower o-rings