6pcs Clean Injection Bosch 2200cc fuel injector with 48mm length 14mm orings to suit 1jz/2jz with Radium Rail
 
Clean Injection CI12000 Series injectors are Bosch Motorsport base injectors. Injectors will also come with plug and play nippon denso connector adapters which allows the injectors to plug right into the factory injector harness. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms. Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 
 
This kit is compatible with popular alcohol mixtures such as E85. All ports are tapped with 3/4"-16 female threads (-8AN ORB). 
**Unacceptable Fuels: Gas/Petrol containing MTBE, specifically VP Q16 and VP Import or other MTBE oxygenated fuels**
 
Listing includes a set of 6 Bosch ev14 2200cc Fuel Injectors. Bosch ev14 2200cc injectors has set the standard for linearity and control in a large injector. Flowing in excess of 2000cc/min at 3 bar, the Bosch 2200cc injector will also provide a smooth stoichiometric idle on E85, and it will achieve this while maintaining strict linearity up to 95% duty cycle at 9000rpm.The injectors is capable of 9 bar fuel pressure which flows as much as 3700cc/min with outstanding low pulse width linearity.
 
Here at Clean Injection we take pride in the way we flow test providing our customers with a set of injectors that are balanced within 1 percent of each other Statically and Dynamically. Testing is done on the industry leading ASNU flow bench providing dead accurate results time after time. Every set of injectors that leaves our shop is supplied with test results and injector data including injector latency info making tuning a breeze. Injectors come with 2 year unlimited mile warranty. 
 
APPLICATION GUIDE:
 
Toyota 1jz/2jz Radium Fuel Rail
 
Injector Specs:
 
-Nominal Flow Rate – 2225cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
 
-Maximum Differential Fuel Pressure – 9.0 Bar (130.5 psi)

-Fuel Compatibility – Compatible with Methanol/Ethanol/E85/All Known Hydrocarbon Fuels. **Unacceptable Fuels: Gas/Petrol containing MTBE, specifically VP Q16 and VP Import or other MTBE oxygenated fuels**
 
-Electrical Connector – Denso
 
ITEMS INCLUDED:
New 6pcs Bosch 2200cc Fuel injectors
New 6pcs plug and play fuel injector connectors