CIean Injection CI750 Series Bosch ev14 750cc Fuel Injectors with Radium Engineering (20-0768) 1JZGTE VVTI engine topfeed fuel rail.  
 
Clean Injection CI750 Series injectors are Bosch Motorsport base injectors. Designed to suit 1JZ vvti engine only.  Injectors will also come with plug and play connector adapters which allows the injectors to plug right into the factory injector harness. Kit also includes Radium Engineering Fuel Rail Kit (Part number: 20-0768) Radium Rail features -8AN ports and black anodized coated which will handle any fuel thrown at it. 
 
 
Clean Injection CI750 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms.  Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 
 
 
INJECTOR FEATURES:
Flow Matched Sets within ≤ 1% Static and Dynamic flow rates
Full Injector Latency Data Provided
Tunable to factory Rock solid Idle
Excellent Fuel Atomization
Direct Plug and Play Fit
Fast Response time
Consistent performance all the way to 7 BAR
2 Year Unlimited Mile Warranty
Stainless Steel Internals 
Compatible with all known race fuels including E85
 
 
 
Vehicle Compatibility Guide:
 
- All 1JZ-GTE JZX100 JZX110 VVT-I Engine
 
INJECTOR SPECS:
 
Static Flow Rate (gasoline) 750cc@ 43.5PSI   
Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers)
Spray Pattern: Wide 30 degree mist (single orifice)
Electrical Connector: USCAR
Fitted with Viton o-rings
60mm Height with 11mm viton fuel rail o-rings
Includes lower injector to intake seal.