CIean Injection CI1000 Series Bosch ev14 1000cc Fuel Injectors with Radium Engineering (20-0768) 1JZGTE VVTI engine topfeed fuel rail.  

Clean Injection CI1000 Series injectors are Bosch Motorsport base injectors. Designed to suit 1JZ vvti engine only.  Injectors will also come with plug and play connector adapters which allows the injectors to plug right into the factory injector harness. Kit also includes Radium Engineering Fuel Rail Kit (Part number: 20-0768) Radium Rail features -8AN ports and black anodized coated which will handle any fuel thrown at it. 

Clean Injection CI1000 series injectors have full stainless steel internationals making it compatible with all known fuels including e85. The injectors retains a consistent linear flow from 2bar to 5bar fuel pressure. Very tuner friendly with fuel trimming down to 1ms.  Every set of Injectors that leaves Clean Injection goes through extensive testing on industry leading ASNU Classic test equipment. Every set is flow tested statically, dynamically, and packed in balanced sets within 1 percent. Injectors will come with flow sheet with full data specs including injector latency/dead time data to make tuning breeze. 

INJECTOR FEATURES:

• Flow Matched Sets within ≤ 1% Static and Dynamic flow rates

• Full Injector Latency Data Provided

• Tunable to factory Rock solid Idle

• Excellent Fuel Atomization

• Direct Plug and Play Fit

• Fast Response time

• Consistent performance all the way to 7 BAR

• 2 Year Unlimited Mile Warranty

• Stainless Steel Internals 

• Compatible with all known race fuels including E85

Vehicle Compatibility Guide:

- All 1JZ-GTE JZX100 JZX110 VVT-I Engine

INJECTOR SPECS:

Static Flow Rate (gasoline) 1000cc@ 43.5PSI   

Coil Resistance: 12 Ohms (This high-impedance injector will work with all factory ECM/PCM injector drivers) Spray Pattern: Wide 30 degree mist (single orifice) Electrical Connector: USCAR Fitted with Viton o-rings

60mm Height with 11mm viton fuel rail o-rings Includes lower injector to intake seal.